Predloga:Convert

Predpona SI
	p · p · u · z

Dokumentacija za predlogo[poglej] [uredi] [zgodovina] [osveži]

Predloga se uporablja na številnih straneh.
Z urejanjem te predloge lahko zelo obremenite strežnike, zato pred uvedbo vse spremembe, ki jih želite uvesti, preizkusite na njenih podstraneh (/peskovnik oziroma /testniprimeri) ali na svojih lastnih podstraneh. Preizkusite jih lahko tudi v posebnem peskovniku za predloge. Preizkušene spremembe se lahko v predlogo dodajo z enim samim urejanjem. Preden predlogo spremenite, se o spremembah rajši pogovorite na njeni pogovorni strani.

Za kopiranje iz angleške Wikipedije oz. spreminjanje te predloge, glejte to informacijo.

Uporablja Lua:

Module:Convert

Predloga:Convert in večina njenih podpredlog je bilo zaščitenih, tako da jih lahko urejajo le administratorji. O želenih spremembah razpravljaj na pogovorni strani predloge Convert.

Vhodni podatek za to predlogo je uporaba decimalne vejice, če jo seveda število vsebuje in NE decimalna pika.

Predloga {{convert}} preračunava iz ene merske enote v drugo, ter nato izpiše formatiran rezultat. Na primer:

{{convert|2|km|mi}} → 2 km (1,2 mi) (vhodni podatek v km, pretvorjen v milje)

{{convert|7|mi|km}} → 7 mi (11 km) (vhodni podatek v mi, pretvorjen v km)

Števila se lahko zaokrožijo, enote so lahko okrajšane s simboli:

{{convert|2|km|mi|2|abbr=on}} → 2 km (1,24 mi)

{{convert|7|mi|km|2|abbr=on}} → 7 mi (11,27 km)

Vrednosti imajo lahko razpon z uporabo |to|... ali |-|...:

{{convert|2|to|5|km|mi}} → 2 do 5 km (1,2 do 3,1 mi)

{{convert|2|-|5|km|mi}} → 2–5 km (1,2–3,1 mi)

Zgled za kombinirani učinek:

{{convert|2|-|5|km|mi|2|abbr=on}} → 2–5 km (1,24–3,11 mi)

{{convert|2|and|5|km|mi|sigfig=3|abbr=off}} → 2 in 5 kilometrov (1,24 in 3,11 milje)

Za več podrobnosti glejte Pomoč:Convert, tehnične informacije

Enote za pretvorbo

Glej tudi: Popoln seznam enot za {{Convert}}

Vnesite enoto za pretvorbo iz v:

{{convert|1|lb|kg}} → 1 lb (0,45 kg)

SI enote na splošno uporabljajo tudi prefikse, kot je "m" za mili (10⁻³) in "M" za mega (10⁶)

Za "na" enote, uporabite "/" (slash): kg/ha

Za enote sestavljene iz treh-enot, itg.: glejte kat:Convert-like templates

Ime enote ali simbol (okrajšava): 1 funt ali 1 lb?

Prednastavljeno, prva kvantiteta prikazuje ime enote, druga pa simbol (ali okrajšavo):

{{convert|1|lb|kg}} → 1 lb (0,45 kg)

Uporaba |abbr=in pomeni obratno obnašanje kot je prednastavljeno:

{{convert|1|lb|kg|abbr=in}} → 1 lb (0,45 kilogrami)

Za okrajšanje obeh ali nobenega:

{{convert|1|lb|kg|abbr=on}} → 1 lb (0,45 kg)
{{convert|1|lb|kg|abbr=off}} → 1 funt (0,45 kilogrami)

Pripomoček: {{cvt}} ima prednastavljeno `|abbr=on`

Predloga {{cvt}} je podobna predlogi {{convert}}, z izjemo tega, da ima prednastavljeno |abbr=on. V {{cvt}}, so omgočene vse ostale opcije. Zatorej:

{{cvt|1|lb|kg}} → 1 lb (0,45 kg)

je enako:

{{convert|1|lb|kg|abbr=on}} → 1 lb (0,45 kg)

Pridevnik: 10 miljna razdalja

Uporabite |adj=on, da izpišete pridevniško obliko. V slovenski Wikipediji zaradi sklanjanja vedno uporabljamo okrajšave, zato ta možnost pri nas ne pride do izraza:

A {{convert|10|mi|km|adj=on}} distance → A 10 mi (16 km) distance.

Default behaviour, for comparison:

{{convert|10|mi|km}} to go → 10 mi (16 km) to go.

Zaokroževanje: 100 ft je 30 m ali 30,5 m ali 30,48 m?

Glejte Pomoč:Convert § Zaokroževanje za več opcij matematičnega zaokroževanja

Po definicij, je 100 ft enako 30,48 m. Zaradi praktične uporabe se izračunane vrednosti zaokrožujejo. Glede tega obstaja več opcij.

Prednastavljeno zaokroževanje

Prednastavljeno predloga {{Convert}}, izpiše pretvorjen rezultat z natančnostjo, ki je primerljiva vhodni vrednosti ali z dvema decimalkama. Izjema je zaokroževanje temperature (glejte spodaj).

Primerii zaokroževanja
Input	Izpis	Opomba
`{{convert\|123\|ft\|m\|-1}}`	123 ft (40 m)
`{{convert\|123\|ft\|m}}`	123 ft (37 m)	enak izpis kot z 0 (spodaj)
`{{convert\|123\|ft\|m\|0}}`	123 ft (37 m)
`{{convert\|123\|ft\|m\|1}}`	123 ft (37,5 m)
`{{convert\|123\|ft\|m\|2}}`	123 ft (37,49 m)	točna vrednost je 37,4904 m
`{{convert\|500\|ft\|m\|-1}}`	500 ft (150 m)
`{{convert\|500\|ft\|m}}`	500 ft (150 m)	enak izpis kot z −1 (zgoraj), ker je faktor pretvorbe med 0,2 in 2 (hence, it should produce same double-zero precision (−2) as in the input value), toda pretvorba mora izpisati dve najmanj decimalki (hence, a higher single-zero precision (−1) is used)
`{{convert\|500\|ft\|m\|0}}`	500 ft (152 m)
`{{convert\|500\|ft\|m\|1}}`	500 ft (152,4 m)
`{{convert\|500\|ft\|m\|2}}`	500 ft (152,40 m)	točna vrednost je 152,4 m
`{{convert\|500\|ft\|cm\|-3}}`	500 ft (15.000 cm)
`{{convert\|500\|ft\|cm}}`	500 ft (15.000 cm)	enak izpis kot z −3 (zgoraj), ker je faktor pretvorbe med 20 in 200 (hence, it should decrease input value's double-zero precision (−2) by 2), toda pretvorba mora izpisati dve najmanj decimalki (hence, a higher triple-zero precision (−3) is used)
`{{convert\|500\|ft\|cm\|0}}`	500 ft (15.240 cm)

Convert podpira štiri tipe zaokroževanja:

Round to a given precision: use a precision number

Specify the desired precision with the fourth unnamed parameter (or third unnamed parameter if the "convert to" parameter is omitted; or fifth unnamed parameter if a range is specified; or fourth unnamed parameter again if a range is specified and the "convert to" parameter is omitted; needs to be replaced with a "precision" named parameter). The conversion is rounded off to the nearest multiple of 1⁄10 to the power of this number. For instance, if the result is 8621 and the round number is "-2", the result will be 8600. If the result is "234.0283043" and the round number is "0", the result will be 234.

Round to a given number of significant figures: `|sigfig=`

To specify the output number to be with n significant figures use |sigfig=<number>:

{{convert|1200|ft|m|sigfig=4}} → 1.200 ft (365,8 m)
{{convert|1200|ft|m|sigfig=3}} → 1.200 ft (366 m)
{{convert|1200|ft|m|sigfig=2}} → 1.200 ft (370 m)
{{convert|1200|ft|m|sigfig=1}} → 1.200 ft (400 m)

Default behaviour, for comparison:

{{convert|1200|ft|m}} → 1.200 ft (370 m)

Setting |sigfig= to a value less than 1 is meaningless:

{{convert|1200|ft|m|sigfig=0}} → 1.200 ft (370 m)^{[convert: nepravilni sigfig]} N

Round to a multiple of 5: 15, 20, 25, ...

Using |round=5 rounds the outcome to a multiple of 5.

{{convert|10|m|ft}} → 10 m (33 ft)
{{convert|10|m|ft|round=5}} → 10 m (35 ft)

Similar: using |round=25 rounds the outcome to a multiple of 25.

{{convert|10|m|ft}} → 10 m (33 ft)
{{convert|10|m|ft|round=25}} → 10 m (25 ft)

Default behaviour, for comparison:

{{convert|10|m|ft|sigfig=4}} → 10 m (32,81 ft)

In a range, one can round each value individually to the default. Use |round=each:

{{convert|10 x 200 x 3000|m|ft}} → 10 m × 200 m × 3.000 m (33 ft × 656 ft × 9.843 ft)
{{convert|10 x 200 x 3000|m|ft|round=each}} → 10 m × 200 m × 3.000 m (33 ft × 660 ft × 9.800 ft)

Round to a multiple of a given fraction: 2+3⁄16 inch

Specify the desired denominator using |frac=<some positive integer>. (Denominator is the below-the-slash number, for example the 3 in 1⁄3).

{{convert|5,56|cm|in|frac=16}} → 5,56 cm (2+3⁄16 in)
{{convert|8|cm|in|frac=4}} → 8 cm (3+1⁄4 in)

The fraction is reduced when possible:

{{convert|8|cm|in|frac=100}} → 8 cm (3+3⁄20 in)

Default behaviour uses decimal notation:

{{convert|5.56|cm|in}} → 556 cm (219 in)

Zaokroževanje temperatur: °C, °F in K

In temperatures, the conversion will be rounded either to the precision comparable to that of the input value or to that which would give three significant figures when expressed in kelvins, whichever is more precise.

{{convert|10.000|C|F K}} → 10.000 °C (18.000 °F; 10.300 K)
{{convert|10.000,1|C|F K}} → 10.000,1 °C (18.032,2 °F; 10.273,2 K)
{{convert|-272|C|F K}} → −272 °C (−457,60 °F; 1,15 K)
{{convert|-272|C}} → −272 °C (−457,60 °F)
{{convert|100|C|F K}} → 100 °C (212 °F; 373 K)
{{convert|0|C|F K}} → 0 °C (32 °F; 273 K)

The precision of the input number in example (1) is one digit, but the precision of its Kelvins expression is three, so the precision of the Fahrenheit conversion is made three (made 180...) . (1) and (2) seem to belie the fact that a 01 degree Celsius change is a 1,8 degrees Fahrenheit change, and make the 32 degrees difference shown in (1) begin to seem off somehow. Result (1) seems off until you set the significant figures yourself with |sigfig=:

{{convert|10000|C|sigfig=5}} → 10.000 °C (18.032 °F)

or you set the precision positionally, relative to the decimal point (zero being at the decimal point):

{{convert|10000|C|0}} → 10.000 °C (18.032 °F)

The precision of the input number in example (2) is six, so the precision of the Fahrenheit output is, whereas before, Kelvins had determined it to be three. Examples (3) and (4) show how this can be hidden and generate questions, but it occurs there because the Kelvins conversion generated two fractional parts. (Before it was the input number that generated the fractional part.) In example (3) the three input digits converted into five significant output digits because of the two digits after the decimal point, generated by the Kelvins conversion. This happened again in (5), but in (6) decimal fractions were neither given as input nor induced by the Kelvins conversion.

Rounding input

There is limited support for rounding the displayed input number. The rounding takes place after conversion, so the output is based on the full-precision input. This is useful when the input is produced by {{#expr:}} or otherwise available to a higher precision than is usefully displayed, and it's desirable to avoid double-rounding.

To round the input to a specified number of digits after the decimal point, use one of the parameters:

|adj=ri0
|adj=ri1
|adj=ri2
|adj=ri3

Note that there is no |adj=ri-1N or similar for rounding above the decimal place. Neither is there support for significant figures, multiples of 5, or any other output-rounding feature.

The default precision is computed based on the input, so an explicit output precision must usually be supplied:

{{convert|4,14159|mi|km|adj=ri0}} → 4 mi (6,66524 km) N (precisions are mismatched)
{{convert|4,14159|mi|km|0|adj=ri0}} → 4 mi (7 km) Y

In this case, if the input were rounded before conversion, a different result would be obtained:

{{convert|{{#expr:4.14159 round 0}}|mi|km|0}} → 4 mi (6 km) N (double rounding)

Into multiple units: 10 °C (50 °F; 283 K)

Separate the multiple output units by a space:

{{convert|10|C|F K}} → 10 °C (50 °F; 283 K)
{{convert|5|km|mi nmi}} → 5 km (3,1 mi; 2,7 nmi)

If the output unit names contain spaces, use + as the separator.

See also:o a value less than 1 is meaningless

For multiple-unit options like 1 ft 5 in, see § In input and § In output.

Ranges of values

Za a conversion of a difference glej #Units of difference.

A range converts two values and separates them by your choice of words and punctuation.

A range: 6 to 17 kg (13 to 37 lb)

Range indicators are entered as the second parameter (between the values). Range separators can be:
Predloga:Convert/dok/range separator list

Multiple dimensions: 6 m × 12 m (20 ft × 39 ft)

Use by:

{{convert|6|by|12|ft|m}} → 6 krat 12 ft (1,8 krat 3,7 m)

Use ×, multiplication sign, or x, letter:

{{convert|6|x|12|m|ft}} → 6 m × 12 m (20 ft × 39 ft)

In science, the formal way is to set |x| and |abbr=on (keeping dimensions right, like in area = x km²):

{{convert|6|x|12|m|ft|abbr=on}} → 6 m × 12 m (20 ft × 39 ft)

About feet, inch in ranges and multiples

While it is possible to enter feet, inch in a simple conversion, this is not possible for ranges:

{{convert|1|ft|3|in|x|3|ft|5|in|mm}} → 1 ft 3 in (^{[convert: neznana enota]})^{[convert: nepravilna opcija]} N

Default behaviour, for comparison:

{{convert|1|ft|3|in|mm}} → 1 ft 3 in (380 mm)

Words

Spelling of unit name: UK metre or US meter?

Default spelling of units is en-UK. To show en-US spelling, use |sp=us:

{{convert|1|m|ft}} → 1 m (3,3 ft)—default

{{convert|1|m|ft|sp=us}} → 1 m (3,3 ft)

Spell out numbers: ten miles

To write a number in words, use |spell=in:

{{convert|10|mi|m|spell=in}} → deset mi (16.000 m)

To spell out both in and out values, use |spell=on:

{{convert|10|mi|m|spell=on}} → deset milj (šestnajst tisoč metrov)

To make first letter a capital, use |spell=In, |spell=On

{{convert|10|mi|m|spell=In}} → Deset mi (16.000 m)
{{convert|10|mi|m|spell=On}} → Deset milj (šestnajst tisoč metrov)

Remember that the spelling of the units (ft, m) is independently set by |abbr=. To the extreme:

{{convert|10|mi|m|spell=on|abbr=off|sp=us}} → deset milj (šestnajst tisoč metrov)

Inserted before units: 4 planted acres

{{convert|4|acre||adj=pre|planted}} → 4 planted akri (1,6 ha)

disp=preunit is similar, but has no separator after the specified text, and can have different text for the output value:

{{convert|4|acre||disp=preunit|planted }} → 4 planted akri (1,6 planted ha)
{{convert|4|acre||disp=preunit|planted |reforested-}} → 4 planted akri (1,6 reforested-ha)

After adjective unit: A 10 ft-long corridor

Note that two units (in this case, ft and m) are required. Use with just one unit will generate an error message.

{{convert|10|ft|m|adj=mid|-long}} → 10 ft-long (3,0 m)

Plurals: 1 inch, 2 inches

The unit symbol is singular always. Depending on the preceding number only, a unit name can be shown plural.

{{convert|1|metre}} → 1 metre^{[convert: nejasna enota]}
{{convert|2|metre}} → 2 metre^{[convert: nejasna enota]}
{{convert|2|metre|abbr=on}} → 2 metre^{[convert: nejasna enota]}

Exception

Entering the unit spelled |foot| forces singular output "foot", whatever the number is.

{{convert|100|foot|abbr=off}} → 100 čevelj (30 metrov)

Fractions: one-eighth of an imperial pint

The convert template also supports spelling out fractions.

{{convert|3+1/2|oz|g|spell=in}} → tri and a half oz (99 g)

Any additional words needed for the fraction can also be added at the end of the template.

{{convert|1/8|imppt|ml|spell=in|adj=pre|of an}} → one-eighth of an imp pt (71 ml)

Wrapping and line breaking

See Help:Convert § Wrapping and line breaking

Spelling out "thousands", "millions", etc.

Most unit codes accept a prefix of e3 (thousand) or e6 (million) or e9 (billion).

{{convert|100|e6mi|e6km}} → 100×10^⁶ mi (160×10^⁶ km)
{{convert|120|e6acre}} → 120×10^⁶ akrov (490.000 km²)
{{convert|120|e6acre|e3km2}} → 120×10^⁶ akrov (490×10^³ km²)

To display both input and output in scientific notation, use |abbr=on

{{convert|100|e6mi|e6km|abbr=on}} → 100×10^⁶ mi (160×10^⁶ km)

To spell out "thousands", "millions", etc., |abbr=unit abbreviates the unit; |abbr=off displays both full unit names.

{{convert|100|e6mi|e6km|abbr=unit}} → 100 milijon mi (160 milijon km)
{{convert|100|e6mi|e6km|abbr=off}} → 100 milijon milj (160 milijon kilometrov)

Števila

Uporaba SI prefiksa: gigameter (Gm) ali mikrometer (μm)=

Units can have an SI prefix like G before the unit: Gm, and giga before the name: gigameter. These are plain multiplication factors.

To illustrate, these are trivial calculations (from meter to meter), showing the multiplication factor:

12 Gm (1,2×10¹⁰ m)
12 µm (1,2×10⁻⁵ m)

The prefix can be added before the SI unit (here: unit m for meter):

{{convert|12|Gm|mi|abbr=on}} → 12 Gm (7.500.000 mi)
Mm: 12 Mm (7.500 mi)
km: 12 km (39.000 ft)
mm: 12 mm (0,47 in)
μm: 12 µm (0,012 mm)
um: 12 µm (0,012 mm) (letter "u" can be used for "μ" here)

The prefix can be used in the output unit:

{{convert|12000|mi|Mm|abbr=on}} → 12.000 mi (19 Mm)
{{convert|12|in|μm|abbr=on}} → 12 in (300.000 µm)

As an exception, the non-SI unit "inch" can have the "μ" prefix too)

{{convert|12|μm|μin|abbr=on}} → 12 µm (470 µin)

Engineering notation: 7 × 10⁶ m

In the unit: e6m

Engineering notation can be entered as a "prefix" to the unit:

{{convert|70|e6m}} → 70×10^⁶ m (230.000.000 ft)

The same is possible for the output unit:

{{convert|23.000.000|ft|e6m}} → 23.000.000 ft (7,0×10^⁶ m)

Any standard unit (not a combination, multiple, or built-in unit) can have such a prefix:

e3 (tisoč),
e6 (milijon),
e9 (billion),
e12 (trillion),
e15 (quadrillion).

Scientific notation: 1.23 × 10⁻¹⁴

In scientific notation, a number is written like 1,23×10⁻¹⁴. The plain number has exactly one digit before the decimal point.

With {{convert}}, the input can be in e-notation such as 12,3e4. This value is displayed as a power of ten, and the output is displayed in scientific notation, except that an output value satisfying 0,01 <= v < 1000 is shown as a normal number. In addition, if the output value is 1000 and sigfig=4 is used, the value is displayed as a normal number.

{{convert|12,3e-15|atm|atm|abbr=on}} → 12,3×10⁻¹⁵ atm (1,23×10⁻¹⁴ atm)
{{convert|0,00000005|atm|atm|abbr=on}} → 0,00000005 atm (5,0×10⁻⁸ atm)

Input with fractions: 1+1⁄2 in (38,1 mm)

The number to convert can be written in fractions. Both / (keyboard slash) and ⁄ (fraction slash) are accepted:

{{convert|1/2|in|mm|1}} → 1⁄2 in (12,7 mm)
{{convert|1⁄2|in|mm|1}} → 1⁄2 in (12,7 mm)

With positive mixed numbers (a positive integer and a fraction), use a + sign

{{convert|2+1⁄2|in|mm|1}} → 2+1⁄2 in (63,5 mm)

With negative mixed numbers, use a hyphen - and repeat it:

{{convert|-2-1⁄2|in|mm|1}} → −2+1⁄2 in (−63,5 mm)

Note that the following cases are not interpreted as mixed numbers:

{{convert|2-1⁄2|in|mm|1}} → 2–1⁄2 in (50,8–12,7 mm). This is interpreted as a range from 2 inches to 1⁄2 inch.
{{convert|-2+1⁄2|in|mm|1}} → ^{[convert: neveljavno število]} N This is neither a mixed number nor a range, and mathematical expressions requiring calculations are not allowed here.

Output with horizontal fraction bar in: ⁠1/2⁠ inch

Using a double slash (//) returns a horizontal bar fraction:

{{convert|1//2|in|mm|1}} → 1/2 in (12,7 mm)
{{convert|2+1//2|in|mm|1}} → 2+1/2 in (63,5 mm)

Ločevanje tisočic: 1.000 mi ali 1000 mi

In input, a comma for thousands separator is accepted but not required; a gap (space) is not accepted. In output, by default, the thousand separator is the comma:

{{convert|1234567|m|ft}} → 1.234.567 m (4.050.417 ft)
{{convert|1.234.567|m|ft}} → 1.234.567 m (4.050.417 ft)
{{convert|1 234 567|m|ft}} → ^{[convert: neveljavno število]} N

Set |comma=off to remove the separator from the output:

{{convert|1234567|m|ft|comma=off}} → 1234567 m (4050417 ft)

Use |comma=gaps to use digit grouping by gap (thin space) as a thousands separator:

{{convert|1234567|m|ft|comma=gaps}} → 1234567 m (4050417 ft)

Default behaviour, for comparison:

{{convert|1234567|m|ft}} → 1.234.567 m (4.050.417 ft)

Setting |comma=5 will only add the separator when the number of digits is 5 or more:

{{convert|1234|m|ft|comma=5}} → 1234 m (4049 ft)
{{convert|1234567|m|ft|comma=5}} → 1.234.567 m (4.050.417 ft)

Default behaviour, for comparison:

{{convert|1234|m|ft}} → 1.234 m (4.049 ft)

Urejanje izpisa

Oklepaji in separatorji: 10 m [33 ft]

Punctuation that distinguishes the two measurements is set by |disp=.
Options are: b (the default), sqbr, comma, or, br, x|…:

{{convert|10|m|ft|disp=sqbr}} → 10 m [33 ft]
{{convert|10|m|ft|disp=comma}} → 10 m, 33 ft
{{convert|10|m|ft|disp=or}} → 10 m ali 33 ft

Default behaviour, for comparison:

{{convert|10|m|ft}} → 10 m (33 ft)

Setting |disp=br will force a new line (<br/>)

{{convert|10|m|ft|disp=br}} → 10 m
33 ft

Also |disp=br() will force a new line, and keep the brackets (useful in tables):

{{convert|10|m|ft|disp=br()}} → 10 m
(33 ft)

Setting |disp=x|… allows any text as separator:

{{convert|10|m|ft|disp=x|_MyText_}} → 10 m_MyText_33 ft (To display spaces, use  )

Flipping (reordering) the two measurements: 1.609,3 metri (1 milja)

Setting |order=flip will flip (swap) the two measurements:

{{convert|1|mi|m|order=flip}} → 1.609,3 metri (1 milja)

Default behaviour, for comparison:

{{convert|1|mi|m}} → 1 milja (1.609,3 metri)

When converting to multiple units, the effect is:

{{convert|10|km|mi nmi|order=flip}} → 6,2137 milje; 5,3996 morske milje (10 kilometrov)
{{convert|10|km|nmi mi|order=flip}} → 5,3996 morske milje; 6,2137 milje (10 kilometrov)

Fixed ordering of output units: 212 °F (100 °C; 373 K)

Setting |order=out shows the output-units as ordered; the input unit is skipped:

{{convert|100|C|F C K|abbr=on|order=out}} → 212 °F (100 °C; 373 K)
{{convert|200|PS|kW hp|0|abbr=on|order=out}} → 147 kW (197 hp)

Displaying parts of the result: 2 (1,5)

It is possible to display only parts of the conversion result:

Convert	Izpis	Vrne
`{{convert\|2\|cuyd\|m3}}`	2 cu yd (1,5 m³)	Regular output (for comparison)
`{{convert\|2\|cuyd\|m3\|abbr=values}}`	2 (1,5)	Input and output numbers
`{{convert\|2\|cuyd\|m3\|disp=unit}}`	cu yd	Input unit
`{{convert\|2\|cuyd\|m3\|disp=unit\|adj=on}}`	cu yd	Input unit, adjective (hyphenated)
`{{convert\|2\|cuyd\|cuyd\|disp=out}}`	2,0 cu yd	Input (workaround. Note repetition of unit in input)
`{{convert\|2\|cuyd\|m3\|abbr=~}}`	2 cu yd [cu yd] (1,5 m³)	Input: both name and symbol
`{{convert\|2\|cuyd\|m3\|disp=unit2}}`	m³	Output unit (symbol)
`{{convert\|2\|cuyd\|m3\|disp=unit2\|abbr=off}}`	kubični metri	Output unit (name)
`{{convert\|2\|cuyd\|m3\|disp=number}}`	1,5	Output value
`{{convert\|2\|cuyd\|m3\|disp=out}}`	1,5 m³	Output value and unit name
`{{convert\|2\|cuyd\|m3\|disp=out\|abbr=off}}`	1,5 kubični metri	Output value and unit symbol

Izpis vhodnega imena in simbola: 2 kilopascals [kPa]

Setting |abbr=~ returns both name and symbol of the first (input) unit:

{{convert|2|kPa|psi|abbr=~}} → 2 kPa [kPa] (0,29 psi)
A {{convert|2|kPa|psi|abbr=~|adj=on}} pressure → A 2 kPa [kPa] (0,29 psi) pressure

Opcije za tabelo

For the wikitable structure, there are three options: add a line-break, split the result over columns and make the table sortable.

Vsiljen znak za novo vrsto

|disp=br adds a line-break and omits brackets.

|disp=br() adds a line-break and does add brackets to the converted value. This may be useful in tables:

`\|disp=br`	`\|disp=br()`
100 km 62 mi	100 km (62 mi)

Stolpci v tabeli prikazujejo le števila

Using {convert} in a table cell, with |disp=table splits the result over two columns:

{{convert|10|m|ft|disp=table}} →

style="text-align:right;"|10

|style="text-align:right;"|33

|disp=tablecen does the same, and also centers the text:

{{convert|20|m|ft|disp=tablecen}} →

style="text-align:center;"|20

|style="text-align:center;"|66

The units are added as a column header:

	m	ft
`\|disp=table`	10	33
`\|disp=tablecen`	20	66
`\|disp=<other>` (default)	30 m (98 ft)

Sortiranje

Use |sortable=on to include a hidden numerical sortkey in the output, suitable for use in a table with sortable columns. Technically, this places a hidden string before the actual displayed values:

{{convert|10|m|ft|sortable=on}} → <span style="display:none">7001100000000000000</span>10 metres (33 ft)

Use both |disp=table and |sortable=on together to produce table columns (pipe symbols) for each value in sortable columns:

	m	ft
A	15+3⁄4	52
B	15,5	51
C	16,0	52,5
D	16	52

The generated sortkey is calculated in a consistent way based on both the value and its unit as passed to the convert template. In most cases convert uses the passed value converted to SI base units. It is therefore not necessarily the displayed value or other alternate units and is calculated regardless of output format options. Using different units or different order of units in individual rows should therefore not lead to incorrect sorting, although variations in rounding can give surprising results, since an unrounded number is used for the sortkey.

Enote

The conversion factors and physical constants are sourced here.

Vse enote

'na' enote: kg/hl

When using a slash (/), a unit like kg/hl is recognized as kilograms per hectolitre and will be converted with other mass/volume units.

{{convert|1000|kg/hl}} → 1.000 kg/hl (100 lb/imp gal)

Units of difference: Expressing a change or difference in temperature

We have already discussed standard temperature conversions (°C, °F, K), as shown in these two examples:

{{convert|10|C}} → 10 °C (50 °F) (standard temperature conversion)
{{convert|10–15|C}} → 10–15 °C (50–59 °F) (standard temperature range conversion)

When expressing a temperature change (e.g., "The temperature increased by 10 °C"), or when comparing temperatures (e.g., "10 to 15 °C warmer"), we cannot use the standard temperature units (|C, |F and |K), which refer to points on the respective scale. Instead, we must use one of the following "units of difference": |C-change, |F-change and |K-change.

Compare the following two examples with the two above:

{{convert|10|C-change}} → 10 °C (18 °F) increase in temperature
{{convert|10–15|C-change}} → 10–15 °C (18–27 °F) warmer than normal

To produce multiple units in the output:

{{convert|10|C-change|F-change K-change}} → 10 °C (18 °F; 10 K) difference

Več enot: 1 ft 5 in

In input

Base document § Input multiples lists options for multiple unit input (like ft,in). It can catch predefined sets only (units that can be subdivided; e.g., yd into ft):

{{convert|1|yd|2|ft|3|in}} → 1 yd 2 ft 3 in (1,60 m)
{{convert|2|ft|3|in|cm}} → 2 ft 3 in (69 cm)
{{convert|1|lb|5|oz|g}} → 1 lb 5 oz (600 g)

In output

Available multiple-unit output options predefined, like ftin and ydftin. The full list is at § Output multiples.

{{convert|2|m|ftin}} → 2 m (6 ft 7 in)
{{convert|2|m|ft in}} → 2 m (6,6 ft; 79 in), using a space, returns the decimal point

Default behaviour, for comparison:

{{convert|2|m}} → 2 m (6 ft 7 in)

Currency per unit: $/mi → $/km

Using currency symbols in a $ per unit value, you can convert the per-unit:

{{convert|10|$/mi|$/km}} → $10/mi ($6,2/km)

You can set the currency in both values using |$=€:

{{convert|10|$/mi|$/km|$=€}} → €10/mi (€6,2/km)

It is not possible to convert the currency. So, this result (mixed currencies) is not possible: $15 per mile (€8,6/km)

Uporaba pretvorb znotraj predlog

For usage in template code, like infoboxes, {{Convert}} has these options:

Pre-formatting fraction input

Modul:Convert/helper can read regular input and pre-format it into {{Convert}}-accepted input.

Your template can accept |input=16 7/8 and use {{#invoke:Convert/helper|number|16 7/8}} → 16+7/8

Using a Wikidata property

Adding the Wikidata property code, like code |input=P2073, to your template code automatically returns the Wikidata property for that article, and convert it. Both number and unit are read.

Note: to return that property value for an other article, use |qid=.

Example for doseg vozila (P2073): Note: this example uses |qid=Q1056131 (testing for Cessna 208 Caravan (Q1056131))

{{convert|input=P2073|qid=Q1056131|ftin|abbr=on}} → 1.500 mi (7.920.000 ft 0 in)
{{convert|input=P2073|qid=Q1056131|km|abbr=on}} → 1.500 mi (2.400 km)
{{convert|input=P2073|qid=Q1056131|km|abbr=on|disp=out}} → 2.400 km

For example see template:Infobox Telescope.

Seznam parametrov

p p u Parameter options for {{convert}}
Parameter	Vrednost	Opis	Opomba
`\|abbr=in`	`in`	Use symbol for first (left-hand side) unit	Unit display
`\|abbr=off`	`off`	Use name for all units	Unit display
`\|abbr=none`	`none`	Use name for all units	Unit display
`\|abbr=on`	`on`	Use symbol for all units	Unit display
`\|abbr=out`	`out`	Use symbol for right-hand side unit (default)	Unit display
`\|abbr=unit`	`unit`	Use symbol for all units when using scientific notation	Unit display
`\|abbr=values`	`values`	Omit both the input and output units: show only the numbers	Unit display
`\|abbr=~`	`~`	Shows both unit name and symbol	Unit display
`\|adj=mid\|…`	`mid`	User-specified text after the input unit; sets `adj=on` (adjective). Expects 1 unnamed parameter.	Word adding, adjective
`\|adj=on`	`on`	Unit name is adjective (singular and hyphenated)	Grammar, adjective
`\|adj=pre\|…`	`pre`	User-specified text before input unit. Expects 1 unnamed parameter.	Word adding
`\|adj=ri0`	`ri0`	Round input with precision 0	Input precision
`\|adj=ri1`	`ri1`	Round input with precision 1	Input precision
`\|adj=ri2`	`ri2`	Round input with precision 2	Input precision
`\|adj=ri3`	`ri3`	Round input with precision 3	Input precision
`\|comma=5`	`5`	Only use comma for thousands separator if 5 or more digits	Number format
`\|comma=gaps`	`gaps`	Use gaps (space), not comma, for thousands separator	Number format
`\|comma=off`	`off`	No thousands separator	Number format
`\|disp=b`	`b`	Join input and output using " (...)" (default)	Join values
`\|disp=sqbr`	`sqbr`	Join input and output using " [...]"	Join values
`\|disp=br`	`br`	Join input and output using "<br/>"	Join values
`\|disp=comma`	`comma`	Join input and output using ", "	Join values
`\|disp=or`	`or`	Join input and output using " or "	Join values
`\|disp=number`	`number`	Display output number only	Parts only
`\|disp=output number only`	`output number only`	Display output number only	Parts only
`\|disp=out`	`out`	Display only output number and name/symbol	Parts only
`\|disp=output only`	`output only`	Display only output number and name/symbol	Parts only
`\|disp=preunit\|…[\|…]`	`preunit`	Text to be inserted after value and before units, for both input and output, with optionally different text for output. Expects 1 or 2 unnamed parameters.	Word adding
`\|disp=table`	`table`	Output is suitable for a table cell with align="right"	Table columns
`\|disp=tablecen`	`tablecen`	Output is suitable for a table cell with align="center"	Table columns
`\|disp=unit`	`unit`	Display input name/symbol only (not input number, not output)	Parts only
`\|disp=unit2`	`unit2`	Display output name/symbol only (not input; not output number)	Parts only
`\|disp=x\|…`	`x`	Join input and output using user-specified text	Word adding
`\|frac=N`	`N`	Show imperial number in fractions, denominator=N	Number format, fraction
`\|input=P2048`	`P2048` (e.g.)	Reads and converts Wikidata property	Inside template
`\|lk=in`	`in`	Link left-hand side unit name or symbol	Unit link
`\|lk=on`	`on`	Link all unit names or symbols (but not twice for the same unit)	Unit link
`\|lk=out`	`out`	Link right-hand side unit name or symbol	Unit link
`\|order=flip`	`flip`	Inverts order of input, output measurements (conversion first)	Order
`\|order=out`	`out`	Displays output units in the order entered, skipping input unit	Order
`\|qid=Q1056131`	`Q1056131` (e.g.)	Reads Wikidata property from Wikidata item	Inside template; testing
`\|round=5`	`5`	Rounds calculation to the nearest multiple of 5	Output precision
`\|round=25`	`25`	Rounds calculation to the nearest multiple of 25	Output precision
`\|round=each`	`each`	In a range, each number is rounded by the default rounding	Output precision
`\|sigfig=N`	`N`	Round output number to N significant figures (N is a positive integer)	Output precision
`\|sortable=on`	`on`	Adds invisible sort key	Table sort
`\|sp=us`	`us`	Use U.S. spelling ("meter" instead of default "metre")	Spelling U.S. names
`\|spell=in`	`in`	Spell input number in words	Spelling numbers
`\|spell=In`	`In`	Spell input number in words with first letter uppercase	Spelling numbers
`\|spell=on`	`on`	Spell input and output numbers in words	Spelling numbers
`\|spell=On`	`On`	Spell input and output numbers in words with first letter uppercase	Spelling numbers
`\|$=€`	`€`	Replace $-sign with a currency sign, for example in `$/acre` (no currency conversion happens)	Cost per unit
`\|debug=yes`	`yes`	Debugging only. In a sortable table: show the normally hidden sort key	Table sort
`\|disp=flip` \|\| data-sort-value="flip" \| `flip`	Deprecated. Use \|order=flip	Order
`\|sing=` \|\| data-sort-value="" \|	Deprecated. Use \|adj=	Plurals

Deprecated options

This list:

Deprecated options should not be used. They may produce incorrect or undesired results and there is no guarantee that they will be supported in the future.

disp=flip is deprecated. Use order=flip instead
sing= is deprecated in any situation. Use adj= instead
Range separator |xx| is deprecated (not MOS compliant). Use |x| instead
Range separator |*| is deprecated (not MOS compliant). Use |x| instead

TemplateData

To je dokumentacija TemplateData za predlogo, ki jo uporabljajo Vizualni urejevalnik in druga orodja; glejte mesečno poročilo o uporabi parametrov za to predlogo.

TemplateData za Convert

Pretvori meritve v druge enote.

Parametri predloge[Urejanje podatkov predloge]
Za to predlogo se uporablja postavitev parametrov v eni vrstici.
Parameter		Opis	Vrsta	Stanje
Vrednost	`1`	Vrednost za pretvorbo.	Številka	zahtevano
Iz enote	`2`	Enota za vpisano vrednost. Zgled km	Vrstica	zahtevano
V enote	`3`	Enote za izpisano vrednost. Za več izpisov enote ločite s presledkom. V izpisani enoti uporabite kot množitveni presledek znak +. Zgled mi nmi	Niz	predlagano
Natančnost ali pripona	`4`	Pomembne številke po decimalni piki ali – v primeru negativnega števila – desetiški eksponent.	Številka	neobvezno
Povezane enote	`lk`	Navedite, katere enote naj bodo povezane z vikipovezavami. Za vse uporabite »on«, za izpisano enoto uporabite »in«, če pa ne želite povezati nobene enote, uporabite »off«. Privzeto off Zgled on	Niz	neobvezno
Okrajšava	`abbr`	Prikaz enot: »on« za prikaz vseh enot s simboli za enoto. »off« za prikaz vseh enot s celo besedo, »in« za prikaz simbolov enot za vpisane enote, »out« za prikaz simbolov enot za izpisane enote, »unit« za prikaz simbolov enot za vpisane in izpisane enote ob uporabi znanstvenega zapisa, »values« za zapis brez enot (tj. brez simbolov enot in brez celih besed zanje). Privzeto out Zgled on, unit, in, out, off	Niz	predlagano
Črkovanje	`sp`	Črkovanje enot. Za zapis imen enot z ameriškim črkovanjem uporabite »us«. Zgled us	Niz	neobvezno
Pridevnik	`adj`	Določite, ali naj se uporabi pridevniška oblika. Uporabite »on« za posamezno ime enote z vezajem, »mid« za pretvorbo na koncu ali »off« (privzeto) za zapis brez pridevniške oblike. Privzeto off Zgled on	Bool	neobvezno
Pretvorba	`disp`	Prikaže rezultat pretvorbe: »or«: po ‘or’, »x«: s predpono in pripono po meri, »b«: v oklepajih, »table«/»tablecen«, »output only«: samostojno, »output number only«: samostojno in brez enote, »unit«: sploh ne, razen vhodne enote; če je vrednost številka, se uporabi kot natančnost. Zgled b	Niz	neobvezno
Razvrstitev	`order`	»flip« najprej vrne pretvorjeno vrednost in nato vpisano vrednost. Zgled flip	Niz	neobvezno
Značilne števke	`sigfig`	Navedite število značilnih števk za zaokroževanje.	Številka	neobvezno
Izpis zaokroževanja	`round`	Način zaokroževanja. »5« zaokroži izpisano število na najbližji večkratnik števila 5, »25« na najbližji večkratnik števila 25, »each« na vsako število v razponu.	Številka	neobvezno
Tisočiško ločilo	`comma`	Nastavi ali odpravi uporabo tisočiškega ločila v številkah. »off«: brez ločila; »gaps«: kot tisočiško ločilo namesto vejice uporabi presledek; »5« in »gaps5«: tisočiško ločilo doda samo, če celoštevilčni del števila obsega 5 ali več mest (10.000 ali več; če je tisočiško ločilo pika, bi 1234 dalo »1234«, 12345 bi dalo »12.345«). Privzeto on Zgled off	Niz	neobvezno
Razvrstilni ključ	`sortable`	»on« ustvari skrit razvrstilni ključ Zgled on	Niz	neobvezno
spell	`spell`	brez opisa	Neznano	neobvezno
sing	`sing`	brez opisa	Niz	opuščeno
ulomek	`frac`	ulomek kot zaokrožitvena enota	Številka	neobvezno
valutni simbol	`$`	pri obeh enotah nastavi valutni simbol Zgled $=€ bo prikazalo " €10 na miljo (€6.2/km)"	Niz	neobvezno

Glej tudi

Zgornja dokumentacija je vključena od Predloga:Convert/dok.
Urejevalci lahko eksperimentirajo v peskovnik in testniprimeri straneh te predloge.
Prosimo dodajte kategorije v /dok podstran. Podstran tega predloga.

Abridged list of units supported by {{Convert}}
Razlaga
sistem	enota	enota- koda	simbol ali abbrev.	opombe	vzorec pretvorbe	kombinacije izhodnih enot
sistem(i), ki jim enota pripada	enote navedene z imenom	enota-koda za uporabo v predlogi	izhodni simboli	druge opombe o enotah	vzorec pretvorbe	izhodne kode za kombinacije pretvorb
DOLŽINA (Polni seznam)
sistem	enota	enota- koda	simbol ali abbrev.	opombe	vzorec pretvorbe	kombinacije izhodnih enot
SI	Mm	Mm	Mm	US spelling: megameter	10 Mm (6.200 mi)
	km	km	km	US spelling: kilometer	10 km (6,2 mi)	km mi
	m	m	m	US spelling: meter	10 m (33 ft)	m ft m ftin
	cm	cm	cm	US spelling: centimeter	10 cm (3,9 in)	cm in
	mm	mm	mm	US spelling: millimeter	10 mm (0,39 in)	mm in
	µm	μm (um)	µm	US spelling: micrometer	10 µm (0,00039 in)
	nm	nm	nm	US spelling: nanometer	10 nm (3,9×10⁻⁷ in)
non-SI metric	Å	Å (angstrom)	Å		10 Å (3,9×10⁻⁸ in)
Imperial & US customary	mi	mi	mi		10 mi (16 km)	mi km
	furlong	furlong	(none)		10 furlong (6.600 ft; 2.000 m)
	chain	chain	(none)		10 chain (660 ft; 200 m)
	rd	rd	rd	For other names of this unit see the full list.	10 rd (160 ft; 50 m)
	fathom	fathom	(none)	assumes 1 fathom ≡ 6 ft	10 fathom (60 ft; 18 m)
	yd	yd	yd	assumes the international definition	10 yd (9,1 m)
	ft	ft (foot)	ft	code "foot" will show "foot" if plural. code "ft" will show "foot" or "feet" depending on value.	10 ft (3,0 m)	ftin (feet and inches) ft m (foot m)
	in	in	in		10 in (250 mm)	in cm in mm
Other	nmi	nmi	nmi	the international standard nautical mile For other nautical miles see the full list.	10 nmi (19 km; 12 mi)
	pc	pc	pc		10 pc (33 ly)
	ly	ly	ly		10 ly (630.000 AU)
	AU	AU	AU		10 AU (1,5×10⁹ km; 930.000.000 mi)
POVRŠINA (Polni seznam)
sistem	enota	enota- koda	simbol ali abbrev.	opombe	vzorec pretvorbe	kombinacije izhodnih enot
SI	km²	km2	km²	US spelling: square kilometer	10 km² (3,9 sq mi)	km2 sqmi
	m²	m2	m²	US spelling: square meter	10 m² (110 sq ft)	m2 sqft
	cm²	cm2	cm²	US spelling: square centimeter	10 cm² (1,6 sq in)	cm2 sqin
	mm²	mm2	mm²	US spelling: square millimeter	10 mm² (0,016 sq in)	mm2 sqin
non-SI metric	ha	ha	ha		10 ha (25 akrov)
Imperial & US customary	sq mi	sqmi	sq mi		10 sq mi (26 km²)	sqmi km2
	aker	acre	(none)		10 akrov (4,0 ha)
	sq yd	sqyd	sq yd		10 sq yd (8,4 m²)
	sq ft	sqft (sqfoot)	sq ft	code "sqfoot" will show "square foot" if plural. code "sqfoot" will show "foot" or "feet" depending on value.	10 sq ft (0,93 m²)	sqft m2 (sqfoot m2)
	sq in	sqin	sq in		10 sq in (65 cm²)	sqin cm2
Other	sq nmi	sqnmi	sq nmi		10 sq nmi (34 km²; 13 sq mi)
	dunam	dunam	(none)	For alternative spellings and definitions see the full list	10 dunam (0,010 km²; 0,0039 sq mi)
	tsubo	tsubo	(none)		10 tsubo (33 m²)
PROSTORNINA (Polni seznam)
sistem	enota	enota- koda	simbol ali abbrev.	opombe	vzorec pretvorbe	kombinacije izhodnih enot
SI	m³	m3	m³	US spelling: cubic meter one kilolitre	10 m³ (350 cu ft)
	cm³	cm3	cm³	US spelling: cubic centimeter one millilitre	10 cm³ (0,61 cu in)
	cm³	cc	cc	US spelling: cubic centimeter one millilitre	10 cm³ (0,61 cu in)
	mm³	mm3	mm³	US spelling: cubic millimeter	10 mm³ (0,00061 cu in)
non-SI metric	kl	kl	kl	US spelling: kiloliter one cubic metre	10 kl (350 cu ft)
	kl	kL	kL	US spelling: kiloliter one cubic metre	10 kl (350 cu ft)
	L	l	L	US spelling: liter one cubic decimetre Allows triple output units. See: polni seznam.	10 L (2,2 imp gal; 2,6 US gal)	l impgal l USgal l U.S.gal l USdrygal l U.S.drygal
	L	L	L		10 L (2,2 imp gal; 2,6 US gal)	L impgal L impqt L USgal L U.S.gal L USdrygal L U.S.drygal
	cl	cl	cl	US spelling: centiliter	10 cl (3,5 imp fl oz; 3,4 US fl oz)
	cl	cL	cL	US spelling: centiliter	10 cl (3,5 imp fl oz; 3,4 US fl oz)
	ml	ml	ml	US spelling: milliliter one cubic centimetre	10 ml (0,35 imp fl oz; 0,34 US fl oz)	ml impoz ml USoz ml U.S.oz
	ml	mL	mL	US spelling: milliliter one cubic centimetre	10 ml (0,35 imp fl oz; 0,34 US fl oz)	mL impoz mL USoz mL U.S.oz
Imperial & US customary	cu yd	cuyd	cu yd		10 cu yd (7,6 m³)
	cu ft	cuft (cufoot)	cu ft	code "cufoot" will show "cubic foot" if plural. code "cufoot" will show "foot" or "feet" depending on value.	10 cu ft (0,28 m³)
	cu in	cuin	cu in		10 cu in (160 cm³)
Imperial	imp bbl	impbbl	imp bbl	36 imp gal	10 imp bbl (1.600 L; 360 imp gal; 430 US gal)
	imp bsh	impbsh	imp bsh	8 imp gal	10 imp bsh (360 L; 80 imp gal; 83 US dry gal)
	imp bsh	impbu	imp bu	8 imp gal	10 imp bsh (360 L; 80 imp gal; 83 US dry gal)
	imp gal	impgal	imp gal	4.54609 litres by definition, also 4 imp qt or 8 imp pt or 160 imp fl oz Allows triple output units. See: polni seznam.	10 imp gal (45 L; 12 US gal)	impgal l impgal L impgal USgal impgal U.S.gal impgal USdrygal impgal U.S.drygal
	imp qt	impqt	imp qt	1/4 imp gal or 40 imp fl oz	10 imp qt (11.000 ml; 380 US fl oz)
	imp pt	imppt	imp pt	1/8 imp gal or 20 imp fl oz	10 imp pt (5,7 L)
	imp fl oz	impoz (impfloz)	imp fl oz	1/160 imp gal	10 imp fl oz (280 ml; 9,6 US fl oz)	impoz USoz impoz U.S.oz impoz ml impoz mL
US customary liquid measure	US bbl	USbbl	US bbl	31½ US gal used for liquids except for oil and beer (see the full list)	10 US bbl (1.200 L; 310 US gal; 260 imp gal)
	US bbl	U.S.bbl	U.S. bbl		10 US bbl (1.200 L; 310 US gal; 260 imp gal)
	bbl	oilbbl	bbl	42 US gal	10 bbl (1,6 m³)
	US bbl	USbeerbbl (usbeerbbl)	US bbl		10 US bbl (1.200 L; 310 US gal; 260 imp gal)
	US bbl	U.S.beerbbl (usbeerbbl)	U.S. bbl		10 US bbl (1.200 L; 310 US gal; 260 imp gal)
	US gal	USgal	US gal	231 cubic inches by definition, also 4 US qt or 8 US pt or 128 US fl oz Allows triple output units. See: polni seznam.	10 US gal (38 L; 8,3 imp gal)	USgal l USgal L USgal impgal
	US gal	U.S.gal	U.S. gal		10 US gal (38 L; 8,3 imp gal)	USgal l USgal L USgal impgal
	US qt	USqt	US qt	1/4 US gal or 32 US fl oz	10 US qt (9.500 ml)
	US qt	U.S.qt	U.S. qt	1/4 US gal or 32 US fl oz	10 US qt (9.500 ml)
	US pt	USpt	US pt	1/8 US gal or 16 US fl oz	10 US pt (4,7 L; 8,3 imp pt)
	US pt	U.S.pt	U.S. pt	1/8 US gal or 16 US fl oz	10 US pt (4,7 L; 8,3 imp pt)
	US fl oz	USoz (USfloz)	US fl oz	1/128 US gal	10 US fl oz (300 ml)	USoz ml USoz mL USoz impoz
	US fl oz	U.S.oz (U.S.floz)	U.S. fl oz	1/128 US gal	10 US fl oz (300 ml)	U.S.oz ml U.S.oz mL U.S.oz impoz
US customary dry measure	US dry bbl	USdrybbl	US dry bbl	105/32 US bsh	10 US dry bbl (1,2 m³)
	US dry bbl	U.S.drybbl	U.S. dry bbl	105/32 US bsh	10 US dry bbl (1,2 m³)
	US bsh	USbsh	US bsh	2150.42 cubic inches by definition	10 US bsh (350 L; 80 US dry gal; 78 imp gal)
	US bsh	U.S.bsh	U.S. bsh	2150.42 cubic inches by definition	10 US bsh (350 L; 80 US dry gal; 78 imp gal)
	US bu	USbu	US bu	2150.42 cubic inches by definition	10 US bu (350 L; 80 US dry gal; 78 imp gal)
	US bu	U.S.bu	U.S. bu	2150.42 cubic inches by definition	10 US bu (350 L; 80 US dry gal; 78 imp gal)
	US dry gal	USdrygal	US dry gal	1/8 US bsh Allows triple output units. See: polni seznam.	10 US dry gal (44 L)	USdrygal l USdrygal L USdrygal impgal
	US dry gal	U.S.drygal	U.S. dry gal	1/8 US bsh Allows triple output units. See: polni seznam.	10 US dry gal (44 L)	U.S.drygal l U.S.drygal L U.S.drygal impgal
	US dry qt	USdryqt	US dry qt	1/32 US bsh	10 US dry qt (11.000 ml)
	US dry qt	U.S.dryqt	U.S. dry qt	1/32 US bsh	10 US dry qt (11.000 ml)
	US dry pt	USdrypt	US dry pt	1/32 US bsh	10 US dry pt (5.500 ml)
	US dry pt	U.S.drypt	U.S. dry pt	1/32 US bsh	10 US dry pt (5.500 ml)	Predloga:Convert/list of units/speed/short list Predloga:Convert/list of units/force/short list Predloga:Convert/list of units/energy/short list Predloga:Convert/list of units/temperature/short list Predloga:Convert/list of units/mass/short list Predloga:Convert/list of units/torque/short list Predloga:Convert/list of units/extra

p p u {{Convert}} help, documentation and maintenance
predloga:Convert pogovor:Convert modul:Convert {{Cvt}}
Pomoč	Pomoč:Convert Pomoč:Convert units Pomoč:Convert sporočila
Dokumentacija	Predloga:Convert/dok seznam parametrov deprecations list range separator list Vse /dok strani
Enote	List of units (abriged) Full list of units area energy force flow length mass speed temperature torque volume Unusual units (likely not in {{Convert}})
Sledenje napak	Kategorija:Convert napake
Moduli	Modul:Convert /data /extra /text Vsi
See also	Module:Convert/helper (preprocess height input)
Related	MOS:Numeric MOS:Units of measurement Module:ConvertNumeric Category:Convert-like templates

Enote za pretvorbo

Ime enote ali simbol (okrajšava): 1 funt ali 1 lb?

Pripomoček: {{cvt}} ima prednastavljeno |abbr=on

Pridevnik: 10 miljna razdalja

Zaokroževanje: 100 ft je 30 m ali 30,5 m ali 30,48 m?

Prednastavljeno zaokroževanje

Round to a given precision: use a precision number

Round to a given number of significant figures: |sigfig=

Round to a multiple of 5: 15, 20, 25, ...

Round to a multiple of a given fraction: 2+3⁄16 inch

Zaokroževanje temperatur: °C, °F in K

Rounding input

Into multiple units: 10 °C (50 °F; 283 K)

Ranges of values

A range: 6 to 17 kg (13 to 37 lb)

Multiple dimensions: 6 m × 12 m (20 ft × 39 ft)

About feet, inch in ranges and multiples

Words

Spelling of unit name: UK metre or US meter?

Spell out numbers: ten miles

Inserted before units: 4 planted acres

After adjective unit: A 10 ft-long corridor

Plurals: 1 inch, 2 inches

Fractions: one-eighth of an imperial pint

Wrapping and line breaking

Spelling out "thousands", "millions", etc.

Števila

Uporaba SI prefiksa: gigameter (Gm) ali mikrometer (μm)=

Engineering notation: 7 × 106 m

In the unit: e6m

Scientific notation: 1.23 × 10−14

Input with fractions: 1+1⁄2 in (38,1 mm)

Ločevanje tisočic: 1.000 mi ali 1000 mi

Urejanje izpisa

Oklepaji in separatorji: 10 m [33 ft]

Flipping (reordering) the two measurements: 1.609,3 metri (1 milja)

Fixed ordering of output units: 212 °F (100 °C; 373 K)

Displaying parts of the result: 2 (1,5)

Izpis vhodnega imena in simbola: 2 kilopascals [kPa]

Opcije za tabelo

Vsiljen znak za novo vrsto

Stolpci v tabeli prikazujejo le števila

Sortiranje

Enote

Vse enote

'na' enote: kg/hl

Units of difference: Expressing a change or difference in temperature

Več enot: 1 ft 5 in

In input

In output

Currency per unit: $/mi → $/km

Uporaba pretvorb znotraj predlog

Seznam parametrov

Deprecated options

TemplateData

Glej tudi

Pripomoček: {{cvt}} ima prednastavljeno `|abbr=on`

Round to a given number of significant figures: `|sigfig=`

Engineering notation: 7 × 10⁶ m

Scientific notation: 1.23 × 10⁻¹⁴