Pomoč:Convert

Template {{convert}} is used to convert a value from one unit of measurement to another. This page provides an overview of the options available when using the template.

• Help:Convert units • Simplified list of some commonly used units
• Pomoč:Convert sporočila • Error and warning messages

Asking questions

• Template talk:Convert • Questions on using the convert template, or discussion of any problems encountered, or proposals to add units or change convert
• Wikipedia:Help desk • General questions
• Module talk:Convert • Discussion concerning the convert modules (however, discussions relating to units should occur at Template talk:Convert)

Units

• Help:Convert units • Overview and simplified list of some commonly used units
• Modul:Convert/documentation/conversion data/dok • Full list of units

Quick start

By default, the name of the input unit is shown, while the output is abbreviated using the unit's symbol. If wanted, names or symbols can be used, and the output precision can be specified.

• {{convert|123,4|ft|m}} → 123,4 ft (37,6 m)
• {{convert|123,4|ft|m|abbr=on}} → 123,4 ft (37,6 m)
• {{convert|123,4|ft|m|abbr=off}} → 123,4 čevlji (37,6 metri)
• {{convert|123,4|ft|m|abbr=off|sp=us}} → 123,4 čevlji (37,6 metri)
• {{convert|123,4|ft|m|0}} → 123,4 ft (38 m)
• {{convert|123,4|ft|m|3}} → 123,4 ft (37,612 m)

Feet and inches can be converted, optionally with fractions.

• {{convert|12,34|m|ft}} → 12,34 m (40,5 ft)
• {{convert|12,34|m|ftin}} → 12,34 m (40 ft 6 in)
• {{convert|12,34|m|ftin|frac=4}} → 12,34 m (40 ft 5+3⁄4 in)
• {{convert|40|ft|6|in|m}} → 40 ft 6 in (12,34 m)
• {{convert|5+3/4|in|mm}} → 5+3⁄4 in (150 mm)
• {{convert|5+3/4|in|mm|0}} → 5+3⁄4 in (146 mm)

To avoid overlinking, units are not normally linked, but they can be when needed.

• {{convert|12300|m2|rood|abbr=off|lk=on}} → 12.300 kvadratnih metrov (12,2 rood)
• {{convert|12300|m2|rood|abbr=off|lk=out}} → 12.300 kvadratnih metrov (12,2 rood)

A convert can be used in an adjectival phrase, and user-specified text can be inserted.

• {{convert|1500|ft|m|adj=on}} → 1.500 ft (460 m)
• {{convert|1500|ft|m|adj=mid|-long}} → 1.500 ft-long (460 m)

If no output unit is specified, a default is used.

• {{convert|123,4|ft}} → 123,4 ft (37,6 m)
• {{convert|123,4|ft|abbr=on}} → 123,4 ft (37,6 m)
• {{convert|1500|ft||adj=mid|-long}} → 1.500 ft-long (460 m)

The last example used || to explicitly show that the output unit has been omitted. If that is not done, the result is an error, and holding the mouse over the error message shows that "-long" is misinterpreted as the output unit.

• {{convert|1500|ft|adj=mid|-long}} → 1.500 ft ()

The input and outputs can be "flipped". When flipped, an option such as |lk=out means "link the right-hand side".

• {{convert|12300|m2|rood|abbr=off|lk=out}} → 12.300 kvadratnih metrov (12,2 rood)
• {{convert|12300|m2|rood|abbr=off|lk=out|order=flip}} → 12,2 rood (12.300 kvadratnih metrov)
• {{convert|12300|m2|rood|abbr=off|lk=in|order=flip}} → 12,2 rood (12.300 kvadratnih metrov)

The input value can be written out in words.

• {{convert|5|mi|km|spell=in|0}} → pet mi (8 km)
• {{convert|5|mi|km|spell=In|0}} → Pet mi (8 km)

Ranges of values are supported.

• {{convert|3|-|6|ft}} → 3–6 ft (0,91–1,83 m)
• {{convert|3|to|6|ft|abbr=off|sp=us}} → 3 do 6 čevljev (0,91 do 1,83 metri)

A range can use more than two values.

• {{convert|100|x|120|x|210|mm|in}} → 100 mm × 120 mm × 210 mm (3,9 in × 4,7 in × 8,3 in)
• {{convert|100|x|120|x|210|mm|in|abbr=on}} → 100 mm × 120 mm × 210 mm (3,9 in × 4,7 in × 8,3 in)
• {{convert|100|by|120|by|210|mm|in}} → 100 krat 120 krat 210 mm (3,9 krat 4,7 krat 8,3 in)

Some input units consist of multiple components.

• {{convert|5|ft|8|in}} → 5 ft 8 in (1,73 m)
• {{convert|11|st|3|lb|kg}} → 11 st 3 lb (71 kg)

An output can be a combination of several units.

• {{convert|123|nmi|km mi}} → 123 nmi (228 km; 142 mi)
• {{convert|123|hPa|psi inHg|abbr=on|lk=on}} → 123 hPa (1,78 psi; 3,6 inHg)

Some outputs consist of multiple units.

• {{convert|123,4|m|ydftin}} → 123,4 m (134 yd 2 ft 10 in)
• {{convert|123,4|kg|stlb}} → 123,4 kg (19 st 6 lb)

Rounding

By default, the output value is rounded to adjust its precision to match that of the input. An input such as 1234 is interpreted as 1234 ± 0.5, while 1200 is interpreted as 1200 ± 50, and the output value is displayed accordingly, taking into account the scale factor used in the conversion.

If the default is not wanted, the precision of output values can be specified using:

• |N (where N is a number) displays N digits after the decimal mark (round output to N decimal places).
• |-N (where -N is a negative number) replaces N digits before the decimal mark with zero (round output to nearest 10^N).
• |sigfig=N (where N is a positive number) to specify the number of significant digits (round output to N significant figures).
• |round=5 to round the output to the nearest multiple of 5. The round value can be 0.5, 5, 10, 25 or 50.

Examples:

• {{convert|1234|ft|m}} → 1.234 ft (376 m)
• {{convert|1234|ft|m|2}} → 1.234 ft (376,12 m)
• {{convert|1234|ft|m|-1}} → 1.234 ft (380 m)
• {{convert|1234|ft|m|round=5}} → 1.234 ft (375 m)
• {{convert|1234|ft|m|round=10}} → 1.234 ft (380 m)
• {{convert|1234|ft|m|round=25}} → 1.234 ft (375 m)
• {{convert|1234|ft|m|round=50}} → 1.234 ft (400 m)
• {{convert|1234|ft|m|sigfig=2}} → 1.234 ft (380 m)
• {{convert|1234|ft|m|sigfig=4}} → 1.234 ft (376,1 m)
• {{convert|1230|ft|m}} → 1.230 ft (370 m)
• {{convert|1230|ft|m|0}} → 1.230 ft (375 m)
• {{convert|1230|ft|m|1}} → 1.230 ft (374,9 m)
• {{convert|5670|sqft}} → 5.670 sq ft (527 m²)
• {{convert|5670|sqft|-2}} → 5.670 sq ft (500 m²)
• {{convert|7x8x12|ft|abbr=on|round=0.5}} → 7 ft × 8 ft × 12 ft (2 m × 2,5 m × 3,5 m)

An input value such as 5000 is assumed to have one significant figure, while 5001 has four. If wanted, "5000." can be used to specify an input number that has four significant figures.

• {{convert|5000|m}} → 5.000 m (16.000 ft)
• {{convert|5000.|m}} → 5.000 m (16.000 ft)

Spell

Use |sp=us to specify that unit names should be displayed with US spelling:

• {{convert|6|km}} → 6 km (3,7 mi)
• {{convert|6|km|sp=us}} → 6 km (3,7 mi)

Use |spell=in to specify that the input value should be spelled in words, or |spell=In (uppercase "I") to start with an uppercase letter:

• {{convert|5|mi|km|spell=in}} → pet mi (8,0 km)
• {{convert|5|mi|km|spell=in|abbr=off|0}} → pet milj (8 kilometrov)
• {{convert|5|mi|km|spell=In|0}} → Pet mi (8 km)
• {{convert|5|mi|km|spell=In|abbr=off|0}} → Pet milj (8 kilometrov)
• {{convert|2+1/4|mi|km|abbr=off|0|spell=In}} → Dve and a quarter milje (4 kilometri)
• {{convert|2+1/4|mi|km|abbr=off|0|spell=In|sp=us}} → Dve and a fourth milje (4 kilometri)

The input and output can be "flipped", as shown in these examples. The resulting first number is spelled:

• {{convert|5|mi||0|order=flip|spell=in}} → osem km (5 mi)
• {{convert|5|mi||0|order=flip|spell=In|abbr=off}} → Osem kilometrov (5 milj)

The "||" provides an empty output unit to mean "use the default".

Both input and output values can be spelled:

• {{convert|5|mi|m|-2|spell=on|sp=us|abbr=off}} → pet milj (osem tisoč metrov)
• {{convert|5|mi|m|-2|spell=On|sp=us|abbr=off}} → Pet milj (osem tisoč metrov)

Thousands separator

Commas in input numbers are ignored. Gaps are not allowed in input.

In output, by default, the thousands separator is the comma:

• {{convert|1234567|m|ft}} → 1.234.567 m (4.050.417 ft)
• {{convert|1.234.567|m|ft}} → 1.234.567 m (4.050.417 ft)

Set |comma=off to remove separators from the result:

• {{convert|1.234.567|m|ft|comma=off}} → 1234567 m (4050417 ft)

Setting |comma=5 adds a separator only when the number of digits is 5 or more:

• {{convert|1234|m|ft}} → 1.234 m (4.049 ft)
• {{convert|1234|m|ft|comma=5}} → 1234 m (4049 ft)
• {{convert|12345|m|ft|comma=5}} → 12.345 m (40.502 ft)

Set |comma=gaps to use a small space for thousands grouping. If the resulting number is copied, only the digits are copied (the gaps are omitted).

• {{convert|1234567|m|ft}} → 1.234.567 m (4.050.417 ft)
• {{convert|1234567|m|ft|comma=gaps}} → 1234567 m (4050417 ft)

Gaps are inserted on both sides of the decimal mark. However, by default, no gap is inserted before a single digit. If a gap is always wanted, |comma=gaps3 can be used.

• {{convert|1234,98765|m|ft|comma=gaps}} → 1234,98765 m (4051,7968 ft)
• {{convert|1234,98765|m|ft|comma=gaps3}} → 1234,98765 m (4051,7968 ft)
• {{convert|1234,9876|m|ft|comma=gaps}} → 1234,9876 m (4051,797 ft)
• {{convert|1234,9876|m|ft|comma=gaps3}} → 1234,9876 m (4051,797 ft)
• {{convert|1,2349876|m|ft|comma=gaps}} → 1,2349876 m (4,051797 ft)
• {{convert|1,2349876|m|ft|comma=gaps3}} → 1,2349876 m (4,051797 ft)

Fractions

An input value can be specified as a fraction.

• {{convert|1/2|in|mm|1}} → 1⁄2 in (12,7 mm)
• {{convert|1/2|in|mm|1|adj=on}} → 1⁄2 in (12,7 mm)
• {{convert|2+1/2|in|mm|1}} → 2+1⁄2 in (63,5 mm)
• {{convert|-2-1/4|in|mm|1}} → −2+1⁄4 in (−57,2 mm)
• {{convert|1/2|in|mm|1|spell=in}} → one-half in (12,7 mm)

If two slashes are used, a horizontal fraction bar is used.

• {{convert|1//2|in|mm|1}} → 1/2 in (12,7 mm)
• {{convert|2+1//2|in|mm|1}} → 2+1/2 in (63,5 mm)

An output can be expressed with a fraction using |frac=N where N is the denominator. For example, |frac=8 rounds the output to the nearest eighth.

• {{convert|219|mm|in|abbr=on}} → 219 mm (8,6 in)
• {{convert|219|mm|in|abbr=on|frac=2}} → 219 mm (8+1⁄2 in)
• {{convert|219|mm|in|abbr=on|frac=4}} → 219 mm (8+1⁄2 in)
• {{convert|219|mm|in|abbr=on|frac=8}} → 219 mm (8+5⁄8 in)
• {{convert|222|mm|in|abbr=on|frac=8}} → 222 mm (8+3⁄4 in)

A fraction is applied to the output unit (if there is only one), or to non-SI units (if using a combination), except that if a precision is also specified, the fraction only applies to the hand unit.

• {{convert|18,45|in|m|frac=2}} → 18,45 in (1⁄2 m)
• {{convert|18,45|in|ft in hand cm|frac=2}} → 18,45 in (1+1⁄2 ft; 18+1⁄2 in; 4,2+1⁄2 h; 46,9 cm)
• {{convert|18,45|in|ft in hand cm|frac=2|1}} → 18,45 in (1,5 ft; 18,5 in; 4,2+1⁄2 h; 46,9 cm)

Joins

The |disp= ("display") option may be used to "join" the input and output, as shown in the following examples.

Convert	Output	Description
{{convert|2,4|m|ft}}	2,4 m (7,9 ft)	default
{{convert|2,4|m|ft|disp=b}}	2,4 m (7,9 ft)	brackets (same as default)
{{convert|2,4|m|ft|disp=sqbr}}	2,4 m [7,9 ft]	square brackets
{{convert|2,4|m|ft|disp=or}}	2,4 m ali 7,9 ft	or
{{convert|2,4|m|ft|disp=comma}}	2,4 m, 7,9 ft	comma
{{convert|2,4|m|ft|disp=br}}	2,4 m 7,9 ft	"<br />", line break
{{convert|2,4|m|ft|disp=br()}}	2,4 m (7,9 ft)	line break and brackets

Ranges

A range of values can be specified, as shown in the following examples.

Separator	Convert	Result	Notes
-	{{convert|3|-|6|ft}}	3–6 ft (0,91–1,83 m)	Input can be hyphen (-) or en dash (–), output uses en dash
and	{{convert|3|and|6|ft}}	3 in 6 ft (0,91 in 1,83 m)
and(-)	{{convert|3|and(-)|6|ft}}	3 in 6 ft (0,91–1,83 m)	and on left; en dash on right
and(-)|order=flip	{{convert|3|and(-)|6|ft|order=flip}}	0,91 in 1,83 m (3–6 ft)
or	{{convert|3|or|6|ft}}	3 ali 6 ft (0,91 ali 1,83 m)
to	{{convert|3|to|6|ft}}	3 do 6 ft (0,91 do 1,83 m)
to(-)	{{convert|3|to(-)|6|ft}}	3 do 6 ft (0,91–1,83 m)	to on left; en dash on right
to(-)|order=flip	{{convert|3|to(-)|6|ft|order=flip}}	0,91 do 1,83 m (3–6 ft)
to about	{{convert|3|to about|6|ft}}	3 do približno 6 ft (0,91 do približno 1,83 m)
+/-	{{convert|3|+/-|6|ft}}	3 ± 6 ft (0,91 ± 1,83 m)
Predloga:Hidden sort key± ±	{{convert|3|±|6|ft}}	3 ± 6 ft (0,91 ± 1,83 m)
+	{{convert|3|+|6|ft}}	3 + 6 ft (0,91 + 1,83 m)
,	{{convert|3|,|6|ft}}	3, 6 ft (0,91, 1,83 m)
, and	{{convert|3|, and|6|ft}}	3, in 6 ft (0,91, in 1,83 m)
, or	{{convert|3|, or|6|ft}}	3, ali 6 ft (0,91, ali 1,83 m)
by	{{convert|3|by|6|ft}}	3 krat 6 ft (0,91 krat 1,83 m)
by(x)	{{convert|3|by(x)|6|ft}}	3 by 6 ft (0,91 m × 1,83 m)	by on left; multiply (×) on right
by(x)|order=flip	{{convert|3|by(x)|6|ft|order=flip}}	0,91 by 1,83 m (3 ft × 6 ft)
x	{{convert|3|x|6|ft}}	3 ft × 6 ft (0,91 m × 1,83 m)	Scientific notation. |abbr=on alters the punctuation
x|abbr=on	{{convert|3|x|6|ft|abbr=on}}	3 ft × 6 ft (0,91 m × 1,83 m)
xx	|xx| is deprecated. Use |x| instead
*	|*| is deprecated. Use |x| instead

Ranges can use more than two values.

Convert	Output
{{convert|3|x|4|x|24|in}}	3 in × 4 in × 24 in (76 mm × 102 mm × 610 mm)
{{convert|3|x|4|to|6+1/2|x|8+3/4|in}}	3 in × 4 in do 6+1⁄2 in × 8+3⁄4 in (76 mm × 102 mm do 165 mm × 222 mm)

Ranges can be specified in the first parameter.

Convert	Output
{{convert|3,2-7,5|ha}}	3,2–7,5 ha (7,9–18,5 akri)
{{convert|3x4x24|in}}	3 in × 4 in × 24 in (76 mm × 102 mm × 610 mm)

Extra words

Some options provide text that is included in the output, as shown in the following examples.

Convert	Output	Description
{{convert|4|ft||adj=mid|-long}}	4 ft-long (1,2 m)	Adjectival with mid-text between input and output (sets |adj=on)
{{convert|40|acre||adj=pre|planted}}	40 planted akrov (16 ha)	Text before the input unit
{{convert|4|m||disp=preunit|+ }}	4+ m (13+ ft)	Same text before the input and output units
{{convert|4|m||disp=preunit|+ |or more }}	4+ m (13 or more ft)	Different text before the input and output units
{{convert|20|impfloz||disp=x|, approximately }}	20 imp fl oz, approximately 570 ml; 19 US fl oz	Text before the output (replaces the join)
{{convert|100|m||disp=x|/day (|/day)}}	100 m/day (330 ft/day)	Text before and after the output (replaces the join)

In each of the above examples, "||" provides an empty output unit which causes the default output to be used. An output unit, possibly empty, must be specified to avoid the template interpreting the extra text as the output unit. For example, using {{convert|4|ft|adj=mid|-long}} has the same effect as using {{convert|4|ft|-long|adj=mid}}, namely that an error would occur because "-long" would be used as the output unit. The following illustrates the error (hover the mouse over the error text to see that the problem is due to "-long" ) and how it may be avoided.

• {{convert|4|ft|adj=mid|-long}} → 4 ft ()
• {{convert|4|ft||adj=mid|-long}} → 4 ft-long (1,2 m)
• {{convert|4|ft| |adj=mid|-long}} → 4 ft-long (1,2 m)
• {{convert|4|ft|m|adj=mid|-long}} → 4 ft-long (1,2 m)

Displaying parts of a conversion

The following examples show how to display only a part of the result.

Convert	Output	Description
{{convert|2|cuyd|m3}}	2 cu yd (1,5 m3)	normal convert
{{convert|2|cuyd|m3|abbr=values}}	2 (1,5)	input and output values
{{convert|2|cuyd|m3|disp=unit}}	cu yd	input unit
{{convert|2|cuyd|m3|disp=unit|adj=on}}	cu yd	input unit, adjectival (hyphenated)
{{convert|2|cuyd|cuyd|disp=out}}	2,0 cu yd	input (workaround: repeat unit)
{{convert|2|cuyd|m3|disp=unit2}}	m3	output unit (symbol)
{{convert|2|cuyd|m3|disp=unit2|abbr=off}}	kubični metri	output unit (name)
{{convert|2|cuyd|m3|disp=number}}	1,5	output value
{{convert|2|cuyd|m3|disp=out}}	1,5 m3	output value and unit
{{convert|2|cuyd|m3|abbr=off|disp=out}}	1,5 kubični metri	output value and unit

Flipping the order of output

To invert the order of measurements, use |order=flip

• {{convert|10|km|mi}} → 10 km (6,2 mi)
• {{convert|10|km|mi|order=flip}} → 6,2 mi (10 km)

Wrapping and line breaking

Convert uses the regular space (" ") and non-breaking space (  which displays as " ") to control line-breaking (also called wrapping/nowrapping).

In all examples below, an   is shown as "_" (red underscore): "3_ft".

Wrapping is possible where a regular space (" ") is used. Prevent wrapping is enforced in the template using the non-breaking space, that ties and keeps text elements together.

3 feet may break after "3"

3 ft, or 3_ft, will not break after "3"

A line break (<br/>) forces a newline (line break), and so overrules any nowrap setting at that point.

Word meaning:

In measurements, SI uses wording that says that value = number × unit, for example length = number × meter.

In {{Convert}} documentation, sometimes 'value' is used to mean the number; and abbr is used to mean unit symbol(s).

Within a single measured value (number and unit)

The separator between the number and the unit can be a space or a nonbreaking space ( ):

• When a unit is abbreviated (symbol is shown), the separator is  .

{{convert|12|m|ft|abbr=on}} → 12_m (39_ft)

• When a unit is not abbreviated (name is shown), the separator is a space.

{{convert|12|m|ft}} → 12_m (39_ft)

• Some units do not have a symbol and always use a space (such as acre).

{{convert|3|acre|m2|abbr=on}} → 3 akri (12.000_m²)

• Except,   is always used when a measurement is in multiple units.

{{convert|1|ft|6|in|cm}} → 1_ft 6_in (46_cm)

{{convert|2|m|ftin}} → 2_m (6_ft 7_in)

• Except, if option |adj=on is used and the unit is not abbreviated, the separator is a hyphen ("-").

{{convert|2|m|ftin|adj=on}} → 2_m (6_ft 7_in)

• When the name of a number is used,   is used as the separator between the number and the name. For example, a measurement spelled as "12 million metres" has   before "million" and a space afterwards.

{{convert|12|e6m}} → 12×10^⁶_m (39.000.000_ft)

Between measurements

• A space is used as the separator in a join between the first and second measurement.

{{convert|3|ft|m}} → 3_ft (0,91_m)

• Except for the special case before "[" :

{{convert|12|in|cm|disp=sqbr|abbr=on}} → 12_in_[30_cm] (  before "[")

• Multiple output measurements (by listing units) always use a space between measurements ("; " has a space after ";").

{{convert|2|acre|m2 sqft ha}} → 2 akra (8.100_m²; 87.000_sq_ft; 0,81_ha)

Between components of a measurement (e.g., in a range; between foot–inch)

• A measurement in multiple units always uses a space between components ("1 foot 6 inches" has   before the unit names, but a space after "foot").

{{convert|1|ft|6|in|cm}} → 1_ft 6_in (46_cm)

• In a range, spaces are generally used to separate items. For example, "to" and "or" have a space before and after in the following.

{{convert|12|to|20|in|cm}} → 12 do 20_in (30 do 51_cm)

{{convert|12|or|20|in|cm}} → 12 ali 20_in (30 ali 51_cm)

• The ranges +/- and , always use  :

{{convert|12|+/-|2|in|cm}} → 12_±_2_in (30,5_±_5,1_cm)

{{convert|12|,|20|in|cm}} → 12,_20_in (30,_51_cm)

• The "to(-)" range is an exception. When a unit is not abbreviated, "to" has   before and a space after.

{{convert|12|to(-)|20|in|cm}} → 12_do 20_in (30–51_cm)

• The "x" range is an exception. When a unit is abbreviated, "×" has a space before and   after.

{{convert|12|x|20|in|cm}} → 12_in ×_20_in (30_cm ×_51_cm)

Overrule by setting a line break

• Parameter |disp=br adds a forced line break (<br/>) between measurements; brackets are omitted. Use |disp=br() to add the line break and keep the brackets.

{{convert|12|m|ft|disp=br}} → 12 metres<br/>39 feet shows:

12_m
39_ft

{{convert|12|m|ft|disp=br()}} → 12 metres<br/>(39 feet) shows:

12_m
(39_ft)

Preview wikicode

To see the wikicode result of the convert template: put your {{convert|...}} code into Special:ExpandTemplates and then preview by clicking OK.

Tables

The following parameters are intended for use in tables.

Parameter	Description
|disp=table	for a table cell with align="right"
|disp=tablecen	for a table cell with align="center"
|sortable=on	output a numeric hidden sort field for a sortable table

The following shows the wikitext output by some example converts.

Convert	Resulting wikitext
{{convert|47,5|kg|lb}}	47,5 kilograms (105 lb)
{{convert|47,5|kg|lb|disp=table}}	align="right"|47,5 |align="right"|105
{{convert|47,5|kg|lb|disp=tablecen}}	align="center"|47,5 |align="center"|105
{{convert|47,5|kg|lb|sortable=on}}	<span style="display:none">7001475000000000000</span>47,5 kilograms (105 lb)

Fixed table

This wikitext:

{|class="wikitable"
! align=right, rowspan="2" |
!colspan="2"| Length
!colspan="2"| Weight
|- style="vertical-align:bottom;"
!metres !!ft in !!kg !!lb
|-
! Lorem ipsum
| {{convert|28,1|m|ftin|disp=table}}
| {{convert|47,5|kg|lb|disp=table}}
|-
! Dolor sit amet
| {{convert|9,9|m|ftin|disp=table}}
| {{convert|74.1|kg|lb|disp=table}}
|-
! Consectetur
| {{convert|38,2|m|ftin|disp=table}}
| {{convert|31.5|kg|lb|disp=table}}
|-
! Adipisicing elit
| {{convert|18,7|m|ftin|disp=table}}
| {{convert|52,7|kg|lb|disp=table}}
|}

produces this table:

	Length		Weight
	metres	ft in	kg	lb
Lorem ipsum	28,1	92 ft 2 in	47,5	105
Dolor sit amet	9,9	32 ft 6 in	741	1.634
Consectetur	38,2	125 ft 4 in	315	694
Adipisicing elit	18,7	61 ft 4 in	52,7	116

Sortable table

This wikitext:

{|class="wikitable sortable"
! align=right, rowspan="2" |
!colspan="2"| Length
!colspan="2"| Weight
|- style="vertical-align:bottom;"
!metres !!ft in !!kg !!lb
|-
! Lorem ipsum
| {{convert|28,1|m|ftin|disp=table|sortable=on}}
| {{convert|47,5|kg|lb|disp=table|sortable=on}}
|-
! Dolor sit amet
| {{convert|9,9|m|ftin|disp=table|sortable=on}}
| {{convert|74,1|kg|lb|disp=table|sortable=on}}
|-
! Consectetur
| {{convert|38,2|m|ftin|disp=table|sortable=on}}
| {{convert|31,5|kg|lb|disp=table|sortable=on}}
|-
! Adipisicing elit
| {{convert|18,7|m|ftin|disp=table|sortable=on}}
| {{convert|52,7|kg|lb|disp=table|sortable=on}}
|}

produces this table:

	Length		Weight
	metres	ft in	kg	lb
Lorem ipsum	28,1	92 ft 2 in	47,5	105
Dolor sit amet	9,9	32 ft 6 in	74,1	163
Consectetur	38,2	125 ft 4 in	31,5	69
Adipisicing elit	18,7	61 ft 4 in	52,7	116

Units in singular or plural

Unit symbols are always singular. Unit names can be singular or plural. A unit is singular when the number is exactly +1:

• {{convert|0,5|ft|m|abbr=off}} → 0,5 čevlji (0,15 metri)
• {{convert|1|ft|m|abbr=off}} → 1 čevelj (0,30 metri)
• {{convert|2|ft|m|abbr=off}} → 2 čevlja (0,61 metri)

Parameter list

Parameter options for {{convert}}
Parameter	Vrednost	Opis	Opomba
|abbr=in	in	Use symbol for first (left-hand side) unit	Unit display
|abbr=off	off	Use name for all units	Unit display
|abbr=none	none
|abbr=on	on	Use symbol for all units	Unit display
|abbr=out	out	Use symbol for right-hand side unit (default)	Unit display
|abbr=unit	unit	Use symbol for all units when using scientific notation	Unit display
|abbr=values	values	Omit both the input and output units: show only the numbers	Unit display
|abbr=~	~	Shows both unit name and symbol	Unit display
|adj=mid|…	mid	User-specified text after the input unit; sets adj=on (adjective). Expects 1 unnamed parameter.	Word adding, adjective
|adj=on	on	Unit name is adjective (singular and hyphenated)	Grammar, adjective
|adj=pre|…	pre	User-specified text before input unit. Expects 1 unnamed parameter.	Word adding
|adj=ri0	ri0	Round input with precision 0	Input precision
|adj=ri1	ri1	Round input with precision 1	Input precision
|adj=ri2	ri2	Round input with precision 2	Input precision
|adj=ri3	ri3	Round input with precision 3	Input precision
|comma=5	5	Only use comma for thousands separator if 5 or more digits	Number format
|comma=gaps	gaps	Use gaps (space), not comma, for thousands separator	Number format
|comma=off	off	No thousands separator	Number format
|disp=b	b	Join input and output using " (...)" (default)	Join values
|disp=sqbr	sqbr	Join input and output using " [...]"	Join values
|disp=br	br	Join input and output using "<br/>"	Join values
|disp=comma	comma	Join input and output using ", "	Join values
|disp=or	or	Join input and output using " or "	Join values
|disp=number	number	Display output number only	Parts only
|disp=output number only	output number only
|disp=out	out	Display only output number and name/symbol	Parts only
|disp=output only	output only
|disp=preunit|…[|…]	preunit	Text to be inserted after value and before units, for both input and output, with optionally different text for output. Expects 1 or 2 unnamed parameters.	Word adding
|disp=table	table	Output is suitable for a table cell with align="right"	Table columns
|disp=tablecen	tablecen	Output is suitable for a table cell with align="center"	Table columns
|disp=unit	unit	Display input name/symbol only (not input number, not output)	Parts only
|disp=unit2	unit2	Display output name/symbol only (not input; not output number)	Parts only
|disp=x|…	x	Join input and output using user-specified text	Word adding
|frac=N	N	Show imperial number in fractions, denominator=N	Number format, fraction
|input=P2048	P2048 (e.g.)	Reads and converts Wikidata property	Inside template
|lk=in	in	Link left-hand side unit name or symbol	Unit link
|lk=on	on	Link all unit names or symbols (but not twice for the same unit)	Unit link
|lk=out	out	Link right-hand side unit name or symbol	Unit link
|order=flip	flip	Inverts order of input, output measurements (conversion first)	Order
|order=out	out	Displays output units in the order entered, skipping input unit	Order
|qid=Q1056131	Q1056131 (e.g.)	Reads Wikidata property from Wikidata item	Inside template; testing
|round=5	5	Rounds calculation to the nearest multiple of 5	Output precision
|round=25	25	Rounds calculation to the nearest multiple of 25	Output precision
|round=each	each	In a range, each number is rounded by the default rounding	Output precision
|sigfig=N	N	Round output number to N significant figures (N is a positive integer)	Output precision
|sortable=on	on	Adds invisible sort key	Table sort
|sp=us	us	Use U.S. spelling ("meter" instead of default "metre")	Spelling U.S. names
|spell=in	in	Spell input number in words	Spelling numbers
|spell=In	In	Spell input number in words with first letter uppercase	Spelling numbers
|spell=on	on	Spell input and output numbers in words	Spelling numbers
|spell=On	On	Spell input and output numbers in words with first letter uppercase	Spelling numbers
|$=€	€	Replace $-sign with a currency sign, for example in $/acre (no currency conversion happens)	Cost per unit
|debug=yes	yes	Debugging only. In a sortable table: show the normally hidden sort key	Table sort
|disp=flip || data-sort-value="flip" | flip	Deprecated. Use |order=flip	Order
|sing= || data-sort-value="" |	Deprecated. Use |adj=	Plurals

Complicated grammar

This example is from article Fort McHenry:

The American defenders had 18-, 24- and 32-pounder (8, 11 and 15 kg) cannons.

This result cannot reasonably be produced by {{convert}}. However, convert can be used to construct the required text.

• Use {{convert}} with subst to insert the required wikitext into the article or your sandbox.

  had {{subst:convert|18|,|24|,|32|lb|kg|0}} cannons

  → had 18, 24, 32 lb (8, 11, 15 kg) cannons

• When the edit is saved, the convert template is replaced with the result.
• Edit the result to produce the final text.

  → had 18-, 24- and 32-pounder (8, 11 and 15 kg) cannons

An alternative to subst would be to enter {{convert|18|,|24|,|32|lb|kg|0}} into Special:ExpandTemplates, then copy and edit its result into the article.

Deprecated

This list: 

Deprecated options should not be used. They may produce incorrect or undesired results and there is no guarantee that they will be supported in the future.

• disp=flip is deprecated. Use order=flip instead
• sing= is deprecated in any situation. Use adj= instead
• Range separator |xx| is deprecated (not MOS compliant). Use |x| instead
• Range separator |*| is deprecated (not MOS compliant). Use |x| instead

Limitations

This is a list of features that the module may be expected to support, but which will not work.

Composite units cannot be used in a range:

• {{convert|2|ft|6|in|to|3|ft|9|in}} → 2 ft 6 in ()

If an expression is wanted, it has to use {{#expr:...}}:

• {{convert|3*12|ft|mm}} → 3×12 ft (910×3.660 mm)
• {{convert|{{#expr:3*12}}|ft|mm}} → 36 ft (11.000 mm)